Shop

SEND AN ENQUIRY

Got a question or product enquiry? Send us a message

FAST SHIPPING

Products in stock are generally shipped the same day.

Rode NT6 1/2 inch Cardioid Condenser Microphone

Code: ROD/NT6
$430.00
The RØDE NT6 is an extremely compact 1/2" cardioid condenser microphone, specifically designed for difficult mounting applications where the highest quality audio is required.

ENQUIRE NOW

Got a question about this product?
Send us a message

Out of Stock - Call for availability

Or get notified when back in stock

OK, we'll notify you when Rode NT6 1/2 inch Cardioid Condenser Microphone is back in stock.

The RØDE NT6 is an extremely compact 1/2" cardioid condenser microphone, specifically designed for difficult mounting applications where the highest quality audio is required.

Although clearly relevant to instrument miking, the NT6 is extremely well suited to any situation where an unobtrusive but powerful microphone is required such as location recording.

The microphone is split into two modular components, joined by via a custom 3m (10') shielded, Kevlar® reinforced cable.

Featuring a gold-sputtered, true-condenser capsule, the NT6 capsule head measures 45mm (1.8”) in length and weighs only 42gm (1.5oz). The included all-metal, multi-position mounting ring provides 180 degrees of vertical rotation.

The NT6 preamp-body incorporates both a high-pass filter and pad setting. The high-pass filter can be introduced to cut vibration, rumble and undesired sounds sources under 80Hz, while the PAD offers a -10dB level attenuation, useful when recording louder sound sources.

The NT6's small form factor make it an ideal small diaphragm cardioid microphone for use in the Mid-Side (M/S) stereo array, in combination with a figure-8 large diaphragm microphone such as the NT2-ANT2000 or K2.

The NT6 is designed and made in Australia, and covered by RØDE's industry leading 10 year warranty.

Features

  • 1/2” condenser capsule with remote preamp
  • Gold sputtered externally biased condenser
  • Two position PAD - 0dB and -10dB
  • Two position High Pass Filter - flat and 80Hz
  • Includes two-axis swivel mount, 3m Kevlar® fibre reinforced cable, windsheild and zip pouch
  • UHeavy duty satin-nickel plated body
  • Low noise and full frequency response
  • Designed and manufactured in Australia
  • 10 year extended warranty when you register online at www.rodemic.com/warranty

Specifications

Acoustic Principle Pressure Gradient
Active Electronics JFET impedance converter with bipolar output buffer
Capsule 0.50"
Polar Pattern Cardioid
Address Type End
Frequency Range 40Hz - 20kHz
Output Impedance 200Ω
Maximum SPL 135dB SPL (@ 1kHz, 1% THD into 1KΩ load)
Maximum Output Level 6.0dBu (@ 1kHz, 1% THD into 1KΩ load
Sensitivity -37.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent Noise Level (A-weighted) 19dB-A
Power Options +24V phantom power+48V phantom power
Weight 386.00gm
Dimensions 189.00mmH x 64.00mmW x 20.00mmD
Output XLR Output
Warranty 1 year with free extension to 10 years following registration here