Shop

Easyrig Quick Release Camera Hook

Code:
The Quick Release Camera Hook from Easyrig securly holds your camera with little to no setup time, just snap it on to the ball stud. With a load capacity of 255 lb, the Camera hook comes with two 3/8"-16 and two 1/4"-20 ball studs which can be fastened to a camera, camera cage, or camera handle.

For purchasing information    

Enquire Now

The Quick Release Camera Hook from Easyrig securly holds your camera with little to no setup time, just snap it on to the ball stud. With a load capacity of 255 lb, the Camera hook comes with two 3/8"-16 and two 1/4"-20 ball studs which can be fastened to a camera, camera cage, or camera handle.

Assembly Instructions

  1. When used with Vario 5, pre-stretch the line 5cm/2in
  2. Guide the line through the hole and tie the ”No:8” knot
  3. Roll the left-over line after the knot around the Quick Release
  4. Press down the plastic cover

Specifications

Compatibility Easyrig Vario 5, Cinema 3, Gimbal Rig, MiniMax, and 2.5
Load Capacity 255 lb / 115 kg
Mounting 2 x 3/8"-16 ball studs
2 x 1/4"-20 ball studs

Safety Instructions

WARNING:

Failure to inspect the Quick Release Camera Hook prior to use will in no event render Easyrig liable for any direct, indirect, special consequential damages whatsoever arising out of or connected with use or misuse of its products.

Always use the included safety strap provided with Easyrig support systems
  1. Inspect the Quick Release for proper functionality before use
  2. Make sure that the support line is secured properly to the Quick Release
  3. Inspect the product has not undergone damage due to freight, improper storage, or mishandling

Specifications

Compatibility Easyrig Vario 5, Cinema 3, Gimbal Rig, MiniMax, and 2.5
Load Capacity 255 lb / 115 kg
Mounting 2 x 3/8"-16 ball studs
2 x 1/4"-20 ball studs