THE PIN-MIC LAVALIER

The Pin-Mic is a new lavalier microphone that eliminates age-old eyesores of traditional clip-based lav mics. It is a chameleon for every application, allowing the wearer to completely hide the microphone from sight through a unique pin and capsule design. A flat backplate goes underneath your garment and the mic capsule connects on the outside to the backplate’s three protruding pins. The mic locks firmly in place, minimizing clothes rustle and unwanted movement. By attaching a sleeve to the capsule, you can glue on buttons or accessories to hide or customize the Pin-Mic based on your specific needs. You have the option of an interior capsule, which is smaller and easier to conceal, or an exterior capsule, which has a permanent wind mesh built in to reduce unwanted noise. Interior capsules come in white and black and exterior capsules come in black and silver. Other accessories, such as custom sleeves, logos and brooches are also available to give the Pin-Mic unparalleled versatility and advantages over its competitors.

Problem: Unsightly clips and wires, clothes rustle
Solution: Nothing visible on the wearer, no clothes rustle

User Quotes:

“I use it on my TV series “Scrubs”. It is the only lav that works on one of my actor’s wardrobe.” – Joe Foglia (Mixer)
“I was out all day today… just left it as a dot between the top two buttons. Very nice. The producer was impressed, as was I.” – Ty Ford (Mixer)
“The new lapel mic worked well. It sounds good, has a lot of gain, and when I put it on a high maintenance actor, he thought it was cool… like a boutonnière!” - Andy Rovins (Boom Operator)
“I prefer the Pin-Mic for its versatility and quiet noise floor.” – James Coburn (Mixer)

PIN-MIC SPECIFICATIONS

Sensitivity: 10mV / Pa - 100mV @114dB SPL
Impedance: 3K Ohm
Polarity: Omni directional
Frequency Response: 20 - 20KHz
Standard Operating Voltage: 1.5V
Power Consumption: 24uA typical
Output Self Noise Voltage: -100dBV maximum, A-Weighted
Max Sound Pressure for 1% THD: 125dB SPL (Max 130dB)
Dynamic Range: 93dB
Signal to Noise Ratio: in excess of 80dB
Sensitivity @ 1Khz: 7.2mV
Operating Temperature: -17ºC to 63ºC
Humidity Coefficient of Sensitivity: 0.06dB/% Relative Humidity, non-condensing
Physical Dimensions: 9.5mm diameter x 4mm

RICSONIX DEMO VIDEO (10.09 Mb) - QT 7 for Mac or PC Required

TINY 2 kw DIMMER

Tiny, lightweight versatile inline 2kilowatt dimmer, for location and studio applications. Using A Grade components and circuitry the Ricsonix 2 Kw Dimmer is 20% smaller than any other commercial unit.

Features include...

• 2kw capacity
• Small 7cmx4cm enclosure
• Sturdy construction for floor use
• 0-260v AC input

Plus:
A remote model of the Ricsonix 2kw Dimmer™ will allow you to adjust the brightness of your lights using a key remote.

Ricsonix products are available from Lemac Sales & Rentals - please contact us for any queries or a quote.