http://www.lemac.com.au/site/DefaultSite/filesystem/images/DPA/0417heavyduty.jpg The d:screetâ„¢ Heavy Duty 4071 Omnidirectional Miniature Microphone is An outstanding speech and vocal mic, the d:screet 4071 will make your voice heard and intelligible.

SEARCH SHOP

DPA

DPA d:screet Heavy Duty 4071 Omnidirectional Lav Mic - Low-cut & Presence Boost

Item Code:

The d:screetâ„¢ Heavy Duty 4071 Omnidirectional Miniature Microphone is An outstanding speech and vocal mic, the d:screet 4071 will make your voice heard and intelligible.

RRP: 0   Save:

For purchasing information

The d:screet™ Heavy Duty 4071 Omnidirectional Miniature Microphone is An outstanding speech and vocal mic, the d:screet 4071 will make your voice heard and intelligible. Use it for all ENG/EFP and even applications which require small microphones that are resistant to moisture, extreme temperature change and humidity.

The d:screet Heavy Duty is DPA's toughest miniature microphone. Made for situations where you require the maximum amount of security and where the visual size is of less importance, the d:screet Heavy-duty which features a stainless steel housing, a heavy-duty cable relief and a thick 2.2 mm cable

An outstanding speech and vocal mic, the d:screet Heavy Duty 4071 will make your voice heard and intelligible. Use it for all ENG/EFP and even applications which require small but tough microphones that are resistant to moisture, extreme temperature change and humidity.

The d:screet series of Miniature Omnidirectional Microphones are the versatile workhorses that adapts to your needs. With eminent sound quality, a large range of accessories, and adapters available for all pro wireless systems, the d:screet Miniature Omni Mics are the obvious choice for any application requiring a big sound and a small footprint.

The d:screet Heavy Duty Omnidirectional Miniature Microphone comes with either our 4060 high sensitivity, our 4061 low sensitivity, or our 4071 Low-cut, Presence Boost capsule and in either black or beige.

Key features:

  • Exceptional audio quality with low noise and high sensitivity
  • Stainless steel housing, heavy-duty cable relief and thick 2.2 mm cable for maximum durability
  • Adapts to all pro wireless systems
  • Large selection of accessories

Specifications

Directional characteristics: Omnidirectional
Principle of operation: Pressure
Cartridge type: Pre-polarized condenser
Frequency range: 20 Hz - 20 kHz
Frequency range, +/- 2 dB: 100 Hz - 15 kHz with typ. 5 dB soft boost at 4-6 kHz
Sensitivity, nominal +/- 3 dB at 1 kHz: 6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted: Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))
Equivalent noise level, ITU-R BS.468-4: Typ. 38 dB (max. 40 dB)
S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 68 dB(A)
Total Harmonic Distortion (THD): <1 % up to 123 dB SPL peak
Total Harmonic Distortion (THD): <1 % up to 120 dB SPL RMS sine
Dynamic range: Typ. 97 dB
Max. SPL, peak before clipping: 144 dB
Output impedance: From MicroDot: 30 - 40 Ω. From DAD6001: 100 Ω.
Cable drive capability: Up to 300 m (984 ft) with DAD6001-BC XLR adapter
Output balance principle: Signal balanced with DAD6001-BC XLR adapter
Common Mode Rejection Ratio (CMRR): > 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR adapter
Power supply: Min. 5 V to max. 50 V through DPA adapter for wireless systems
Power supply: 48 V phantom power +/- 4 V with DAD6001 XLR adapter
Current consumption: Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR adapter
Connector: MicroDot
Color: Black or beige
Weight: 13 g (0.03 oz) incl. Cable and MicroDot connector
Microphone diameter: 5.4 mm (0.2 in)
Microphone length: 17.6 mm (0.7 in)
Cable length: 1.8 m (5.9 ft)
Cable color: Black or beige
Cable diameter: 2.2 mm (0.09 in)
Polarity: Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)
Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
Relative Humidity (RH): Up to 90%